|
|
Introductory Chemistry | © David W. Ball ; contributors: Oi Mi Lam, George Roungos Source: Flat World Knowledge |
Learning Objectives |
The simplest organic compounds are those composed of only two elements: carbon and hydrogen. These compounds are called hydrocarbons . Hydrocarbons themselves are separated into two types: aliphatic hydrocarbons and aromatic hydrocarbons. Aliphatic hydrocarbons are hydrocarbons based on chains of C atoms. There are three types of aliphatic hydrocarbons. Alkanes are aliphatic hydrocarbons with only single covalent bonds. Alkenes are hydrocarbons that contain at least one C-C double bond, and alkynes are hydrocarbons that contain a C-C triple bond. Occasionally, we find an aliphatic hydrocarbon with a ring of C atoms; these hydrocarbons are called cycloalkanes (or cycloalkenes or cycloalkynes ).
Aromatic hydrocarbons have a special six-carbon ring called a benzene ring. Electrons in the benzene ring have special energetic properties that give benzene physical and chemical properties that are markedly different from alkanes. Originally, the term aromatic was used to describe this class of compounds because they were particularly fragrant. However, in modern chemistry the term aromatic denotes the presence of a six-membered ring that imparts different and unique properties to a molecule.
The simplest alkanes have their C atoms bonded in a straight chain; these are called normal alkanes. They are named according to the number of C atoms in the chain. The smallest alkane is methane:
Figure 16.1.Three-Dimensional Representation of Methane
The methane molecule is three dimensional, with the H atoms in the positions of the four corners of a tetrahedron.
To make four covalent bonds, the C atom bonds to four H atoms, making the molecular formula for methane CH 4 . The diagram for methane is misleading, however; the four covalent bonds that the C atom makes are oriented three dimensionally toward the corners of a tetrahedron. A better representation of the methane molecule is shown in Figure 16.1, “Three-Dimensional Representation of Methane” .
The next-largest alkane has two C atoms that are covalently bonded to each other. For each C atom to make four covalent bonds, each C atom must be bonded to three H atoms. The resulting molecule, whose formula is C 2 H 6 , is ethane:
Propane has a backbone of three C atoms surrounded by H atoms. You should be able to verify that the molecular formula for propane is C 3 H 8 :
The diagrams representing alkanes are called structural formulas because they show the structure of the molecule. As molecules get larger, structural formulas become more and more complex. One way around this is to use a condensed structural formula , which lists the formula of each C atom in the backbone of the molecule. For example, the condensed structural formula for ethane is CH 3 CH 3 , while for propane it is CH 3 CH 2 CH 3 . Table 16.1, “The First 10 Alkanes” gives the molecular formulas, the condensed structural formulas, and the names of the first 10 alkanes.
Table 16.1.The First 10 Alkanes
Because alkanes have the maximum number of H atoms possible according to the rules of covalent bonds, alkanes are also referred to as saturated hydrocarbons .
Alkenes have a C-C double bond. Because they have less than the maximum number of H atoms possible, they are called unsaturated hydrocarbons . The smallest alkene - ethene - has two C atoms and is also known by its common name ethylene:
The next largest alkene - propene - has three C atoms with a C-C double bond between two of the C atoms. It is also known as propylene:
What do you notice about the names of alkanes and alkenes? The names of alkenes are the same as their corresponding alkanes except that the ending is - ene , rather than - ane . Using a stem to indicate the number of C atoms in a molecule and an ending to represent the type of organic compound is common in organic chemistry, as we shall see.
With the introduction of the next alkene, butene, we begin to see a major issue with organic molecules: choices. With four C atoms, the C-C double bond can go between the first and second C atoms or between the second and third C atoms:
(A double bond between the third and fourth C atoms is the same as having it between the first and second C atoms, only flipped over.) The rules of naming in organic chemistry require that these two substances have different names. The first molecule is named 1-butene , while the second molecule is named 2-butene . The number at the beginning of the name indicates where the double bond originates. The lowest possible number is used to number a feature in a molecule; hence, calling the second molecule 3-butene would be incorrect. Numbers are common parts of organic chemical names because they indicate which C atom in a chain contains a distinguishing feature.
The compounds 1-butene and 2-butene have different physical and chemical properties, even though they have the same molecular formula - C 4 H 8 . Different molecules with the same molecular formula are called isomers . Isomers are common in organic chemistry and contribute to its complexity.
Alkynes, with a C-C triple bond, are named similarly to alkenes except their names end in - yne . The smallest alkyne is ethyne, which is also known as acetylene:
Propyne has the structure
With butyne, we need to start numbering the position of the triple bond, just as we did with alkenes:
Aromatic compounds contain the benzene unit. Benzene itself is composed of six C atoms in a ring, with alternating single and double C-C bonds:
The alternating single and double C-C bonds give the benzene ring a special stability, and it does not react like an alkene as might be suspected. Benzene has the molecular formula C 6 H 6 ; in larger aromatic compounds, a different atom replaces one or more of the H atoms.
As fundamental as hydrocarbons are to organic chemistry, their properties and chemical reactions are rather mundane. Most hydrocarbons are nonpolar because of the close electronegativities of the C and H atoms. As such, they dissolve only sparingly in H 2 O and other polar solvents. Small hydrocarbons, such as methane and ethane, are gases at room temperature, while larger hydrocarbons, such as hexane and octane, are liquids. Even larger hydrocarbons are solids at room temperature and have a soft, waxy consistency.
Hydrocarbons are rather unreactive, but they do participate in some classic chemical reactions. One common reaction is substitution with a halogen atom by combining a hydrocarbon with an elemental halogen. Light is sometimes used to promote the reaction, such as this one between methane and chlorine:
Halogens can also react with alkenes and alkynes, but the reaction is different. In these cases, the halogen reacts with the C-C double or triple bond and inserts itself onto each C atom involved in the multiple bonds. This reaction is called an addition reaction . One example is
The reaction conditions are usually mild; in many cases, the halogen reacts spontaneously with an alkene or an alkyne.
Hydrogen can also be added across a multiple bond; this reaction is called a hydrogenation reaction . In this case, however, the reaction conditions may not be mild; high pressures of H 2 gas may be necessary. A platinum or palladium catalyst is usually employed to get the reaction to proceed at a reasonable pace:
By far the most common reaction of hydrocarbons is combustion, which is the combination of a hydrocarbon with O 2 to make CO 2 and H 2 O. The combustion of hydrocarbons is accompanied by a release of energy and is a primary source of energy production in our society ( Figure 16.2, “Combustion” ). The combustion reaction for gasoline, for example, which can be represented by C 8 H 18 , is as follows:
2C 8 H 18 +25O 2 --> 16CO 2 +18H 2 O +~5060 kJFigure 16.2.Combustion
The combustion of hydrocarbons is a primary source of energy in our society.
Key Takeaways |
If you wish to have a tutorial, discussion, or question & answer session on this course topics with Dr Huei-Nin Liu-Johnson (PEOI's faculty #103834, PhD Yale University) you are welcome to email your request to hnliujohnson@gmail.com . PEOI's interactive learning is free of charge to registered students, and registration is also free.
[Your opinion is important to us. If you have a comment, correction or question pertaining to this chapter please send it to comments@peoi.org .]
| Prior Introduction | Modified: 2023 | Next Branched Hydrocarbons |
